EN
EN
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
IW
ID
LV
LT
Description
● Wholeline control PLC siemens s7-1500 series;
● Online automatic thickness measurement& control, imported NDC infrared thickness measurement& control system;
● The entire line uses Servo motors, the extruder uses Servo motors, all nip motors use German geared motors, the gearbox uses German gear, and the nip drive uses SIEMENS S120;
● Casting DIE: JC-TIMES technology for multi-layer co extrusion;
● Distributor: JC-TIMES ultra multi-layer multiplication technology;
● Fully automatic central turret winding machine, automatic roll changing/automatic winding/automatic unloading;
● The winding is controlled based on the taper tension of the coildiameter to ensure smooth winding, especially for large diameter winding. After the diameter of the membrane coil increases, the tension of the membrane coil is ensured;
● Tension control: E+Limported tension sensor from Germany, which ensures stable tension and small fluctuations, ensuring that the film does not stretch or deform;
● The central winding and gap winding modes can be freely switched for easy operation. The automatic roll changing mode can be divided into two options: length roll changing and diameter roll changing, After setting the length or diameter, the rollcan be automatically changed with one click operation;
● The center drive is driven by a German geared motor, with stable output; Hydraulic unwinding, safe and stable, can unload film at any position, with flexible operation;
● The design of the unloading hydraulic manipulator is safe and stable, with no shaft protection;
● Intelligent protection function for changing the coil, predicting and preventing injuries caused by operational errors.
