5 Layer Online MDO&coating Single Material&hign Barrier Blown Film Solution

Best solution for single material

Replacing aluminum foil (good choice for liquid milk package) Easy to recycle

Degradable

Microwave  heating  available

Technical characteristics

● Whole  line  control  PLC: Siemens  S7-1500  series;

● Online  automatic  airing& thickness measurement& control, imported   KUNDIG  thickness   measurement& control system;

● The entire line uses Servo motors, the extruder uses Servo motors, all nip motors use German geared motors, the gearbox uses German gearbox, and the nip drive uses SIEMENS Cu320;

● Blown film  DIE: Unique technology for blown film processing;

● Special designed MDO online,stretch ratio can be set easilly;

● Hign barrier material coating on  line;

● Aie cushion oven, no contact with the film;

● Fully  automatic central&surface winding machine,automatic roll changing/automatic  winding/automatic unloading;

● The winding is controlled based on the taper tension of the coil diameter to ensure smooth winding,especially for large diameter winding;

● After the diameter of the membrane coil increases,the tension of the membrane coil is ensured;

● Tension control:E+Limported tension sensor from Germany,which ensures stable tension and small fluctuations,ensuring that the film does not stretch or deform;

● The central winding and gap winding modes can be freely switched for easy operation.

● Surface winding driven by Siemens servo motor;

● Central winding driven by Siemens servo motor;

● The automatic rollchanging mode can be divided into two options;

● Length roll changing and diameter roll changing,After setting the length or diameter,the roll can be automatically changed with one click operation;

● The center drive is driven by a German geared motor,with stable output;Hydraulic unwinding,safe and stable,can unload film at any position,with flexible operation;

● The design of the unloading hydraulic manipulator is safe and stable,with no shaft protection;

● Intelligent protection function for changing the coil,predicting and preventing injuries caused by operational errors.